Installation
3.5
Installation of CP6003-SA Peripheral Devices
The CP6003-SA is designed to accommodate various peripheral devices, such as USB devic-
es, Serial ATA devices, PMC/XMC devices, rear I/O devices, etc. The following figure shows
the placement of the SATA Flash module and the MMADP-SATA01 module, which is required
for connecting an onboard HDD/SSD to the CP6003-SA.
Figure 3-1:
Connecting a Peripheral Device to the CP6003-SA
SATA Flash
Module
SATA con. for
external SATA
devices
MMADP-SATA01
Module
SATA con. for
external SATA
devices
The following chapters provide information regarding installation aspects of peripheral devices.
Page 3 - 8
2.5" Serial ATA
HDD / SSD
CP6003-SA
Heat Sink
Heat Sink
ID 1044-9757, Rev. 2.0