Table of Contents
Advertisement
2.5. Flash Memory
The CP6007 provides flash interfaces for the uEFI BIOS and a M.2 Flash module.
2.5.1.
SPI Boot Flash for uEFI BIOS
The CP6007 provides two 256 Mbit SPI boot flashes for two separate uEFI BIOS images, a standard SPI boot flash and
a recovery SPI boot flash. The fail-over mechanism for the uEFI BIOS recovery can be controlled via the DIP switch
SW3, switch 2.
The uEFI BIOS code and settings are stored in the SPI boot flashes. Changes made to the uEFI
BIOS settings are available only in the currently selected SPI boot flash. Thus, switching over
to the other SPI boot flash may result in operation with different uEFI BIOS code and
settings. Switching flashes while ME is in full operating mode could result in malfunction.
2.5.2.
M.2 Flash Module
The M.2 connector (Type 2280) can be used for a SSD flash module for operating system and data.
2.6. Security Options
2.6.1.
Trusted Platform Module 2.0
The CP6007 supports the Trusted Platform Module (TPM) 2.0, conceived by TCG (Trusted Computing Group). TPM2.0
is a security chip specifically designed to provide enhanced hardware- and software-based data and system security.
TPM2.0 is based on the Infineon SLB9670XQ 2.0 security controller and stores sensitive data such as encryption and
signature keys, certificates and passwords, and is able to withstand software attacks to protect the stored
information.
www.kontron.com
CP6007-SA, CP6007-RA – User Guide, Rev. 1.0
// 29
Advertisement
Table of Contents
