Table of Contents
Advertisement
7
Installation
Motorola recommends that only qualified personnel undertake the installation of a 30/60 Mbps
Backhaul system.
7.1
PREPARATION
Before proceeding with the installation you should:
•
Check the contents of all packages against the parts lists shown in the packing list.
•
Ensure that you have the correct tools for the job.
•
Ensure that you are qualified to undertake the work.
•
Ensure that you have taken the correct safety precautions.
•
Have completed the site planning as described in Section 6 "Site Planning".
7.2
INSTALLATION PROCEDURE
The 30/60 Mbps Backhaul installation procedure consists of the following steps:
•
Mounting the ODUs, Section 7.6
•
Connecting up, Section 7.7
•
Mounting the PIDUs, Section 7.7.6
•
Powering Up, Section 7.5.9
•
Aligning the ODUs, Section 7.7.10
7.3
TOOLS REQUIRED
The following specific tools are required to install the 30/60 Mbps Backhaul in addition to
general tools:
•
Two 13mm Spanners / Wrenches
•
RJ45 Crimp Tool
•
IBM Compatible Personal Computer (PC) running Windows 98 or later with 10 or
100baseT Ethernet (Ability to change IP settings easily is recommended)
•
Either Internet Explorer version 6 or higher, or Netscape Navigator 7.01 or higher are
recommended.
•
2 x short Ethernet patch cables
•
6mm general purpose crimp tool for the grounding lug (optional for lightning Protection)
7.4
INSTALLATION SUPPORT
For installation support, first contact your supplier or resellers, then escalate as needed to
Canopy Technical Support. A Frequently Asked Questions (FAQ) Section can be found in
Section 14.
Issue 3.1, July 2006
Page 37 of 162
Advertisement
Table of Contents
