Table of Contents
Advertisement
Installation
Chapter 2: Installation
Overview
Before you Begin
Easy Setup
To install the Desktop CPEi 800/825 Series, review the following sections:
• Before You Begin
• Easy Setup
Before you begin installation, check that you have received the following items with
your Desktop CPEi 800/825:
Table 2-1 In the box with your CPE, you should have
Item
AC Adapter
Ethernet Cable
Desktop CPEi 800/825 Quick Start Guide
In addition, you need:
• A computer
• An RJ-11 telephone cable (optional). Two RJ-11 telephone cables are required if
your service provider has supplied you with two telephone numbers.
The CPE is easily set up in your home. Basic installation equipment needed are the
power adapter and cord, Ethernet cable, a PC or laptop computer and the CPE device.
If you want to use the VoIP functionality, you need an RJ-11 phone cable and a
telephone.
Perform the following tasks before attaching the power cord or powering up the unit:
• Stand the CPE on a flat surface.
• Plug the power adapter into the power connector on the back of the unit.
• Plug the AC power cord into an AC outlet.
• Plug one end of the Ethernet cable into the Ethernet connector on the back of the
unit.
• Plug the other end of the Ethernet cable into the Ethernet connector of your
computer.
• To use VoIP functionality of the phone, plug one end of the phone line into the
activated phone connector on the back of the unit. Phone line activation is
dependent upon your service contract.
• Plug the other end of the phone line into the phone line connector of your
telephone.
Description
Power adapter and cord connects the
Desktop CPE to an AC electrical outlet.
The Ethernet cable connects the Internet
port on your Desktop CPE to your PC or
laptop computer.
Desktop CPEi 800/825 Quick Start Guide
2
Advertisement
Table of Contents
