What To Do If; General Information - wtw Multi 3410 Operating Manual

Multi 3410
Sensor symbol flashes
Display
Meter does not react to
keystroke
You want to know which
software
version is in the meter
ba75863e02 12/2009
6

What to do if...

6.1

General information

Cause
– Calibration interval expired
Cause
– Batteries almost empty
Cause
– Operating condition undefined
or EMC load unallowed
Cause
– E. g., a question by the service
department
What to do if...
Remedy
– Recalibrate the measuring
system
Remedy
– Charge the batteries (see
section 3.3.2 C
ONNECTING
/
THE POWER PACK
)
THE BATTERIES
– Replace the batteries (see
section 5.1 M
AINTENANCE
Remedy
– Processor reset:
Press the <MENU/ENTER>
and <On/Off> key simulta-
neously
Remedy
– Switch on the meter.
Open the menu, <MENU/
_
ENTER > / Storage & con-
fig / System / Service infor-
mation. The instrument data
is displayed.
CHARGING
)
87