Oxi 3310 IDS (Oxi 3315)
Dissolved oxygen
ba75944e02
10/2014
6.3
Reset
You can reset (initialize) all sensor settings and sensor-independent settings
separately from each other.
6.3.1
Resetting the measurement settings
The calibration data are reset to the default settings together with
the measuring parameters. Recalibrate after performing a reset.
The following settings for D.O. measurements are reset to the default settings
with the Reset function:
Setting
Calibration interval
Check interval
Measured parameter
Relative slope (S
Rel
Salinity (value)
Salinity (function)
The sensor settings are reset under the Reset menu item in the menu for cali-
bration and measurement settings. To open the settings, display the required
measured parameter in the measured value display and press the <ENTER>
key.
6.3.2 Resetting the system settings
The following system settings can be reset to the default condition:
Setting
Language
Audio signal
Baud rate
Output format
Decimal separator
Contrast
Illumination
Shutoff time
Temperature unit
Stability control
Default settings
180 d
60 d
D.O. concentration
)
1,00
0,0
Off
Default settings
English
on
4800 Baud
ASCII
.
50 %
Auto
1 h
°C
on
Settings
37