Automatic Sensor Recognition - wtw Cond 3310 IDS Operating Manual

Cond 3310 IDS
ba77051e04 07/2017
Further information on the wireless operation of IDS sensors:
 Web resources
 Operating manual of the IDS WLM System.

1.2.3 Automatic sensor recognition

The automatic sensor recognition for IDS sensors allows
 to operate an IDS sensor with different meters without recalibrating
 to assign measurement data to an IDS sensor
– Measurement datasets are always stored and output with the sensor
name and sensor series number.
 to assign calibration data to an IDS sensor
– Calibration data and calibration history are always stored and output with
the sensor name and sensor series number.
 to hide menus automatically that do not concern this sensor
To be able to use the automatic sensor recognition, a meter that supports the
automatic sensor recognition (e.g. Cond 3310 IDS) and a digital IDS sensor
are required.
In digital IDS sensors, sensor data are stored that clearly identify the sensor.
The sensor data are automatically taken over by the meter.
Overview
9