Mda V8 And Other Etas Products; Launching Mda From Inca - ETAS MDA V8.6 User Manual

ETAS
To show the quick access toolbar below the ribbon
1.4 MDA V8 and Other ETAS Products
MDA V8.6 works together with the following ETAS products:
INCA (V7.2.2 or higher)
l
EHANDBOOK-NAVIGATOR (V6.1 or higher)
l
1.4.1 Launching MDA from INCA
When working in INCA, you can directly access MDA V8.6 to analyze the meas-
urement recording.
To launch MDA V8.6 from INCA
To establish a connection, MDA V8.6 and INCA (V7.2.2 or higher) must be
installed on the same machine.
MDA V8.6 – User Guide
The ribbon is no longer displayed.
2. To show the hidden ribbon, redo one of the actions described
under step 1.
1. To show the quick access toolbar below the ribbon, click the
arrow.
2. Select Show below the Ribbon.
3. To relocate the quick access toolbar again, click the arrow and
select Show above the Ribbon.
1. As a prerequisite, you have preselected MDA V8.6 as default MDA
version in INCA under User Options
2. Launch MDA V8.6, e.g., by doing one of the following:
After having finished the measurement recording in the exper-
iment environment of INCA, click
While the recording is still running in INCA, you can take a
snapshot, also by clicking
file format *.mdf4.
Please note that the snapshot recording requires a com-
bination of MDA V8.4.1 and INCA V7.3.0 or higher.
For further details about the settings for snapshot recording,
please see the INCA User Documentation.
In the INCA main window, click S
measure files that you want to use in MDA V8.6.
1 Welcome to MDA V8
> General tab.
.
. The recording must be in the
+ . Then, select the
HIFT
20