Table of Contents
Advertisement
ETAS
No. Description
Toolbar
Here several icons for specific functionalities are shown. For a detailed
description of the toolbar functions, see "Oscilloscope's Toolbar" below.
Strip area
The signals in the oscilloscope can be distributed onto strips for a bet-
ter overview. For more information, see "Using Strips" on page 87.
Signal list
The signal list shows the signal information and cursor values. For
more information, see "Adjusting the Signal List" below.
5.2.1
Oscilloscope's Toolbar
The toolbar provides you with the following functions:
The complete set of oscilloscope configuration possibilities is available in the
Properties docking window. There the tooltips provide a detailed description of
the properties and their possible options.
In the following, only the more advanced functions are explained in further
detail.
For more information about synchronizing, scrolling, and zooming, see "Time
Navigation and Synchronization" on page 118.
5.2.2
Adjusting the Signal List
The signal list on the right side of the oscilloscope shows the signal inform-
ation, e.g. signal names and optionally meta information (i.e. device, unit, ras-
ter) and cursor values.
You can perform the following actions:
MDA V8.6 – User Guide
Zooming functionality
Adjustment of axes
Print and store functions
Cursor options
Number of decimals for signal values
Export measure data functionality
Data representation
5 Instruments
84
Advertisement
Table of Contents
