Using Axes - ETAS MDA V8.6 User Manual

ETAS
To delete a strip
Note that a strip is also deleted when the last signal of a strip is removed.
5.2.5

Using Axes

You can perform the following actions:
"To assign signals using the selection wheel" below
l
"To use common axes" on the next page
l
"To use individual axes" on the next page
l
"To scroll axes" on page 92
l
"To scroll the time axis" on page 92
l
"To zoom axes" on page 92
l
"To adjust the axis range manually" on page 92
l
"To predefine an axis range for a signal" on page 93
l
"To set the default behavior for signal-to-axis assignment" on page 94
l
"To delete axes" on page 94
l
To assign signals using the selection wheel
To assign signals to an oscilloscope, you can use the selection wheel. It
appears when signals are assigned to an oscilloscope or moved within an
oscilloscope via drag and drop.
MDA V8.6 – User Guide
1. To merge signals to one strip, right-click the desired signals from
different strips.
2. Click Move to New Strip.
or
1. To move signals to separate strips, right-click the desired signals
from one strip or different strips.
2. Click Move to Individual Strip(s).
1. Open the context menu of the strip that you want to delete.
2. Select Delete Strip.
1. Drag the signals into the analog graphical area of the oscil-
loscope or to the desired position in the signal list. After a short
delay the selection wheel appears.
2. Within the selection wheel, drop the signals onto one of the
options:
5 Instruments
90