Table of Contents
Advertisement
ETAS
5.8
Video
In the Video instrument, you can display the video file recorded with the INCA
video add-on and especially for analysis in relation to other measurements. To
use the Video instrument, you need a valid license provided with the INCA
Video-Integration add-on.
The video signal VIDEO_TIMECODE contains only a series of timestamps. The
device name of the video signal is used as link to the actual video file on the
hard disk named <measurefile>_<device_name>.mp4.
Note
The video file names must not be renamed as they are referenced by the cor-
responding MDF file (*.mf4).
The timestamps in the VIDEO_TIMECODE are used for synchronization.
You can perform the following actions:
"To define the Video properties" below
l
"To display a video signal" below
l
"To scroll and synchronize" below
l
To define the Video properties
The complete set of configuration possibilities for the Video instrument is avail-
able in the Properties docking window. There the tooltips provide a detailed
description of the properties and their possible options.
To display a video signal
To scroll and synchronize
To quickly navigate to a specific timestamp in the video, or to synchronize the
Video instrument with other instruments, see "Time Navigation and Syn-
chronization" on the next page.
MDA V8.6 – User Guide
1. In the Variable Explorer, select the signal VIDEO_TIMECODE
from the corresponding device which refers to the camera name.
2. Drag and drop the video signal onto a layer or layer tab of the con-
figuration and select the Video instrument.
If a signal is already assigned, the new video signal replaces the
old one. It is not possible to assign multiple signals. For more
information, see "Assigning Signals to Instruments" on page 51.
3. To start the video, click Play.
4. To stop the video, click Pause.
5 Instruments
117
Advertisement
Table of Contents
