Zooming With The Time Slider - ETAS MDA V8.6 User Manual

ETAS
To scroll slowly line by line
Use the keyboard and press the A
R keys.
IGHT
5.9.3

Zooming with the Time Slider

You can perform the following actions in instruments with variable scale:
"To zoom" below
l
"To perform a fast zooming" below
l
"To enter an exact value for the time range" on the next page
l
"To show the full time range of the measure file" on the next page
l
Currently visible time range
Magnified section of the time slider (displayed after zooming in)
To zoom
To perform a fast zooming
MDA V8.6 – User Guide
1. Move the cursor to the left or right edge of the currently visible
time range .
The cursor changes into a double arrow.
2. If you want to perform a symmetric zoom operation, press C
3. Enlarge or reduce the visible time range by dragging the double
arrow.
When you zoom in very deep, the complete time range cannot be
displayed anymore. An additional area appears showing a mag-
nified section of the time range
1. The magnified section of the time range must be displayed (see
"To zoom" above). Move the cursor to the left or right edge of the
currently visible time range
The cursor changes into a double arrow.
2. If you want to perform a symmetric zoom operation, press C
3. While keeping the mouse button pressed, move the cursor to the
desired position.
The faster you move the cursor, the faster is the zooming per-
formed.
U , A D
RROW P RROW OWN
.
.
5 Instruments
, A L , or A
RROW EFT RROW
.
TRL
.
TRL
122