ETAS MDA V8.6 User Manual page 141

What MDA V7
Pulse11 Pulse11 (time, signal,
duration)
RollingAverage RollingAverage
(signal, count)
RSFlipFlop RSFlipFlop (set_input,
reset_input)
SampleCounter SampleCounter (signal)
SumTotal SumTotal (signal)
Threshold1 Threshold1 (l, u, s, a, b)
Migrated formula in MDA V8
Debounce (time, signal, 0,
duration)
Accumulate_Samples_Average (signal,
count)
State_RSFlipFlop (set_input,
reset_input)
Count (signal)
Accumulate_Prefix_Sum
(signal)
((l <= s) && (s <= u)) ? a : b
Comment
Time range defined by the parameter dur-
ation.
Detects pulses given by the argument dur-
ation.
MDA V8 assumes that the previous
(unknown) values are the same as the first
available sample.
Calculates the average of signal over the
number of samples defined by count.
Time range defined by sample parameter
count.
Time range: From start
RSFlipFlop with positive logic.
Both parameters must have the same meas-
ure rate.
Time range: From start
Returns the number of samples of the signal.
SumTotal since measure start.
Threshold computation
Time range: From start