Table of Contents
Advertisement
ETAS
To delete a rule set
2.5
Handling of Special Files
2.5.1 Using Label Files (LAB)
2.5.2 Extracting Measure File Attachments
2.5.3 Using Calibration Data Exchange Files (CDF)
2.5.4 Loading and Interpreting a Bus Trace File (BLF)
2.5.1
Using Label Files (LAB)
MDA V8.6 supports to read and write a selection of signals in a label file format
(*.lab). Besides the signal names, a label file can optionally contain raster
information. Using LAB files to filter variables facilitates and accelerates the
variable selection in INCA and MDA.
You can perform the following actions:
"To add a LAB file" below
l
"To write a LAB file" below
l
To add a LAB file
Label files can be handled like measure files. To know how you can add,
replace, or remove them, see "Adding, Replacing, and Removing Measure Files"
on page 28
Label files are listed in the Variable Explorer in an own category and can be
used in the same way as the source category. For more information, see "Fil-
tering per categories" on page 49.
To write a LAB file
To check the export progress, see "To check the export status" on page 38 and
"To see the exported file in Windows Explorer" on page 38. Alternatively, you
can trigger an export (see "Exporting and Converting Measure Data" on
page 34) and select in the export dialog one of the available export formats
LabFile.
MDA V8.6 – User Guide
1. Click on the rule set in the Rule Sequence list.
2. Click
in the Rule Sequence toolbar.
1. Open the Configuration Manager.
2. Right click an object node or select different object nodes for
which you want to export the signals.
3. In the context menu click Create Label File.
4. In the Save As window select the format.
You can choose between V1.0 (only signal names) and V1.1 (sig-
nal names and raster information).
5. Click Save.
2 Configuration Creation
41
Advertisement
Table of Contents
