Using Cursors - ETAS MDA V8.6 User Manual

ETAS
To adjust the axis range or set a favorite axis range
5.3.5

Using Cursors

In the scatter plot, two values of the signal are marked by cursors. The cross-
hair indicates the exact position of each cursor. If several strips exist, two hori-
zontal lines per strip are displayed.
No. Description
Tooltip at the value axis displaying the signal value
Tooltip at the cross-hair of the cursors displaying the timestamp
To see how you can use the possibilities of the Scatter Plot instrument, watch
our video
MDA V8.6 – User Guide
1. Click the tab Axes in the Properties window.
2. To define the minimum and the maximum value of an axis, do
one of the following:
For analog signals, enter the desired values in the input fields.
For discrete signals, select the values from the drop-down
menu.
3. To set the values as favorite axis range, click the star in the Set
as Favorite column. When the values are shown in bold and blue,
the current axis range matches to the favorite axis range already.
4. To apply the favorite axis range, do one of the following:
To apply the favorite axis range to all axes, click
To apply the favorite axis range to a selected axis or strip,
right-click this item and choose Apply Favorite Axis Range.
Using the Scatter Plot.
5 Instruments
.
105