ETAS MDA V8.6 User Manual page 61

ETAS
"To edit a calculated signal" below
l
"To rename a calculated signal" below
l
"To delete a calculated signal" below
l
"To duplicate a calculated signal" below
l
For more information on how to import calculated signals from an XCS file
exported from INCA or MDA V7, see "Importing Calculated Signals via XCS
Export File" on page 27.
To see how you can create and clone a calculated signal, watch our video
Creating Calculated Signals.
To edit a calculated signal
To rename a calculated signal
To delete a calculated signal
To duplicate a calculated signal
MDA V8.6 – User Guide
1. In the calculated signal list on the left of the window, select a cal-
culated signal.
2. Click .
3. Change the data. For more information about the possible values
of the entry fields, see "To define a calculated signal" on page 58.
1. In the calculated signal list on the left of the window, select a cal-
culated signal.
2. Click .
3. Enter a new name.
Valid characters are a-z, A-Z, 0-9, underscore, point, and square
brackets. Square brackets must always occur in pairs. Other char-
acters or blank space are not allowed.
After saving, the new name is displayed in all instances where the
calculated signal is used.
1. In the calculated signal list on the left of the window, select a cal-
culated signal.
2. Click .
The calculated signal is deleted but the assignment of the cal-
culated signal to instruments is kept.
1. Select a calculated signal in the list on the left of the window.
2. In the context menu, select Clone calculated signal.
A new calculated signal with the given data from the selected sig-
nal is filled in the form. The name is based on the selected signal.
4 Calculated Signals
61