Using Axes - ETAS MDA V8.6 User Manual

ETAS
To delete a strip
5.3.4

Using Axes

You can perform the following actions:
"To use a Y-axis as X-axis" below
l
"To scroll axes" below
l
"To zoom axes" below
l
"To adjust the axis range or set a favorite axis range" on the next page
l
To use a Y-axis as X-axis
To scroll axes
To zoom axes
MDA V8.6 – User Guide
The new position of the floating strip is indicated by a small
blue rectangle.
1. Open the context menu of the strip that you want to delete.
2. Select Delete strip.
1. Right-click the Y-axis that you want to use as X-axis.
2. Select Use as X-axis.
The X-axis and Y-axis including their ranges are swapped.
1. Hover the cursor over the axis that you want to scroll.
2. Use the mouse wheel or the left mouse button to scroll the meas-
urement scale up and down.
Alternatively, click the strip and drag the measurement scale of all
axes up and down.
1. Hover the cursor over the axis that you want to zoom.
2. Do one of the following:
Press C and use the mouse wheel to zoom out or in.
TRL
Press C and the left mouse button. To zoom out or in,
TRL
move the cursor up or down.
5 Instruments
104