Adjusting Signals; Zooming - ETAS MDA V8.6 User Manual

ETAS
The complete set of the scatter plot configuration possibilities is available in
the Properties docking window. There the tooltips provide a detailed descrip-
tion of the properties and their possible options.
In the following, only the more advanced functions are explained in further
detail.
For more information about synchronizing, scrolling, and zooming, see "Time
Navigation and Synchronization" on page 118.
5.3.1

Adjusting Signals

You can perform the following actions:
To remove a signal
5.3.2

Zooming

To see how you can use the possibilities of the Scatter Plot instrument, watch
our video
You can perform the following actions:
"To define the zoom area" below
l
"To show the complete value range" on the next page
l
To define the zoom area
MDA V8.6 – User Guide
Adjustment of axes
Print and store functions
Cursor options
Bound options
Export measure data functionality
1. Do one of the following:
If only one strip exists and you want to remove its signal, right-
click the Y-axis.
If you want to remove the signal of the X-axis, right-click the X-
axis.
2. Select Remove Signal.
Using the Scatter Plot.
1. Press either C and the left mouse button or just the right
TRL
mouse button.
2. While keeping the button pressed, move the cursor horizontally or
vertically.
The selected zoom area is highlighted.
5 Instruments
102