Table - ETAS MDA V8.6 User Manual

ETAS
To delete all bounds
5.4

Table

The table can display different kinds of signals including enumeration (VTab),
event, and string signals.
The table shows enumeration signals as follows: If a string value is available, it
is displayed. If the enumeration signal has a default value, the table displays
the default value for all numerical values for which there is no associated
string value. If the enumeration signal has no default value and if there is no
string value defined for a numerical value, "n/a" is displayed.
In an MDF measure file, single samples can be marked with an "invalid" flag. In
the table instrument, these invalid samples are marked by a red exclamation
mark.
You can perform the following actions:
"To define the table properties" below
l
"To scroll" below
l
"To navigate to the start or end of the time range" on the next page
l
"To move the synchronization timestamp" on the next page
l
"To show or hide header rows" on the next page
l
"To reorder columns" on the next page
l
"To fill empty cells" on the next page
l
"To change the number of decimals" on page 110
l
"To change the data representation of a signal" on page 110
l
"To remove signals" on page 110
l
To see how you can use the possibilities of the Table instrument, watch our
video
To define the table properties
The complete set of configuration possibilities for the table instrument is avail-
able in the Properties docking window. There the tooltips provide a detailed
description of the properties and their possible options.
To scroll
To quickly navigate to a specific timestamp, you can use the time slider. For
more information, see "Time Navigation and Synchronization" on page 118.
Alternatively, you can scroll by using the keyboard:
MDA V8.6 – User Guide
1. Click .
2. Select Delete All Bounds from the drop-down menu.
Using the Table.
1. To move upwards, press the P
2. To move downwards, press the P
5 Instruments
U or C U key.
AGE P URSOR P
D or C
AGE OWN URSOR
D key.
OWN
108