Table of Contents
Advertisement
ETAS
4
Calculated Signals
Calculated signals are helpful in displaying and analyzing measure data, for
example, for generating a difference signal or for making a direct comparison
with specific measured values. You first have to define a calculated signal.
Then it can be selected like any other measure signals in the Variable Explorer
and be assigned to an instrument. The inputs to calculated signals are always
step interpolated, i.e. the last available value will be taken for calculation until
there is a new value available.
The calculated signals editor is divided into the following areas:
MDA V8.6 – User Guide
4 Calculated Signals
57
Advertisement
Table of Contents
