Searching Within The Configuration - ETAS MDA V8.6 User Manual

ETAS
"To display the preview via the layer taskbar" below
l
"To hide and unhide the layer taskbar" below
l
To display the preview via the layer taskbar
In the layer taskbar at the bottom of the layer, all available instruments of the
same type are represented by one icon for the type. Only instruments on the
currently selected layer are displayed.
To hide and unhide the layer taskbar
6.3

Searching within the Configuration

You can perform searches in different areas of the program. If you want to
search for a signal being available in the measure file, perform your search in
the Variable Explorer. For more information, see "To search for signals" on
page 48. If you perform a search in the Configuration Manager, the search is
executed for signals already being in use and assigned to an instrument.
MDA V8.6 – User Guide
1. If the layer taskbar is currently hidden, unhide it. For more inform-
ation, see "To hide and unhide the layer taskbar" below.
2. On the layer taskbar, hover the cursor over the icon of one of the
instrument types.
For all instruments of this instrument type, a small preview is dis-
played. If more instruments exist than can be displayed in the
small preview, arrows at the left and the right border appear
which allow you to navigate to the relevant instrument. The
mouse wheel can be used for navigation as well.
3. Hover the cursor over the preview of one of the instruments.
A large preview is shown in actual size above the small preview.
4. To move the instrument into the foreground of the configuration,
click its small or enlarged preview.
1. At the bottom of the configuration window, click
For all layers of the configuration, the layer taskbar is set to auto-
hide mode.
2. To unhide the layer taskbar, hover the cursor over the gray line
and click .
6 Navigation and Search
.
127