Table of Contents
Advertisement
ETAS
To show or hide header rows
To distinguish signals that have the same name but are coming from different
devices or different rasters, you can display the device, raster, or unit.
To reorder columns
To change the decimals of the time column
To remove a signal
5.7
GPS Map
The GPS map view displays GPS tracks in a map that are constituted of the
measure signals latitude and longitude. It is very useful if you want to put geo-
graphic data providing street and terrain information in relation to other meas-
ured signals. Thus, any abnormal behavior in the engine module under test can
be analyzed in a better way if the GPS data like longitude and latitude are con-
sidered during the offline analysis.
MDA V8.6 – User Guide
1. To move the synchronization timestamp, double-click a row.
or
2. Use the keyboard:
i. To select a row above the current synchronization timestamp,
press A
+C
LT
URSOR
ii. To select a row below the current synchronization timestamp,
press A
+C
LT
URSOR
1. In the toolbar, click
erties Window.
A list of the default header rows appears.
2. To show or hide a header row, select or clear the checkbox of the
respective name in the list.
1. Move a column by dragging its column header to the new pos-
ition within the table header.
A line between the columns appears to indicate the new position.
2. Release the mouse button.
1. Mark the time column for which you want to change the number
of decimal places.
2. In the toolbar, click one of the following icons:
To show more decimal places, click
To show fewer decimal places, click
1. Right-click the signal name in the column header of the event list.
2. Select Remove Signal.
Alternatively, select the signal name and press D
U
.
P
D
.
OWN
or use the tab Instrument in the Prop-
.
.
5 Instruments
.
EL
114
Advertisement
Table of Contents
