Table of Contents
Advertisement
ETAS
To navigate to the start or end of the time range
To move the synchronization timestamp
In synchronized mode, the synchronization timestamp is highlighted in the
second row in blue. If the synchronization timestamp is located between the
first two rows, a blue line is displayed between these rows. For more inform-
ation, see "Synchronizing Instruments" on page 119.
To show or hide header rows
To distinguish signals that have the same name but are coming from different
devices or different rasters, you can display the device, raster, or unit.
To reorder columns
To fill empty cells
MDA V8.6 – User Guide
1. To navigate to the start of the time range, press the H
2. To navigate to the end of the time range, press the E
1. To move the synchronization timestamp, double-click a row.
or
2. Use the keyboard:
To select a row above the current synchronization timestamp,
press A
+C
LT
URSOR
To select a row below the current synchronization timestamp,
press A
+C
LT
URSOR
1. In the toolbar, click
erties window.
A list of the default header rows appears.
2. To show or hide a header row, select or clear the checkbox of the
respective name in the list.
1. Move a column by dragging its column header to the new pos-
ition within the table header.
A line between the columns appears together with highlighted
areas on the left and on the right of the line.
2. Select the left or right highlighted area to place the column in
front of or behind this line.
3. Release the mouse button.
1. If the value of a signal is not available, you can display its inter-
polated value. In the table toolbar, click
The empty cells are filled with the last available sample (so-called
"step-mode" or "constant interpolation"). These values are shown
in gray italic font.
2. To undo this action, click the icon again.
U
.
P
D
.
OWN
or use the tab Instrument in the Prop-
.
5 Instruments
key.
OME
key.
ND
109
Advertisement
Table of Contents
