First Step; Choice Of Language - ESAB A2 PEK Instruction Manual

GB
Travel motion
Key for travel motion in the direction of welding where the symbol is indicated on the
weld equipment. To stop travel motion press
The LED illuminates during travel motion.
Fast motion
Key for fast motion of wire feed or travel motion.
The LED illuminates during fast motion.
Welding start
Key for welding start.
Welding stop
Key for welding stop for all travel motions and all motors.
Positioning knob
The uppermost right-hand knob is called the positioning knob in the instruction
manual and is used to position the cursor.
Settings knob
The three knobs under the panel are called settings knobs in the instruction manual
and are used to change the set values in the panel.
1.2

First step

1.2.1

Choice of language

This menu appears when the machine is first started:
SAW: CA
A 450 Amp
V 30.0 Volt
NONE NONE
The control panel is set to English on delivery. To select your language, proceed as
follows:
bi24d1ea
50 cm/min
GAS /
FLUX NONE
- 7 -
, or .
|
|
|
|
|
|
2ND
FUNCT
© ESAB AB 2009