Mounting The Patient Hand Grips - AGFA DR 400 User Manual

Mounting the patient hand grips

The pair of patient hand grips are used to stabilize the patient and give a
feeling of security. Using the hand grips will avoid the patient grasping the
table edges which could cause a risk to pinch fingers.
To mount a hand grip:
1. Slide the hand grip in the rails of the tabletop.
2. Tighten the hand screw to lock the hand grip in position.
1
Hand screw
1.
Figure 50: Hand grip
DR 400 | Radiographic Table and X-Ray Tube Stand | 141
Note: The hand grips are not intended to support the weight of
the patient.
3231E EN 20210708 1530