Teledyne SyriXus 65x Installation And Operation Manual page 165

Command (Refer to
NOTE 1 & NOTE 2
.)
LIMITS
LIMITSB
LIMITSC
LIMITSD
LOCAL
MAXFLOWA=#
MAXFLOWB=#
MAXFLOWC=#
MAXFLOWD=#
MAXFLOWA
MAXFLOWB
MAXFLOWC
MAXFLOWD
MAXPRESSA=#
MAXPRESSB=#
MAXPRESSC=#
MAXPRESSD=#
MAXPRESSA
MAXPRESSB
MAXPRESSC
MAXPRESSD
MFLOWA=#
MFLOWB=#
MFLOWC=#
MFLOWD=#
MFLOWA
MFLOWB
MFLOWC
MFLOWD
MINFLOWA=#
MINFLOWB=#
MINFLOWC=#
MINFLOWD=#
MINFLOWA
MINFLOWB
MINFLOWC
MINFLOWD
MINPRESSA=#
MINPRESSB=#
MINPRESSC=#
MINPRESSD=#
MINPRESSA
MINPRESSB
MINPRESSC
MINPRESSD
EAR99 Technology Subject to Restrictions Contained on the Cover Page
SyriXus Series Pumps Installation and Operation Guide
Table 8-3 Serial Commands (Continued)
Returns the pressure and flow rate limits.
Returns the instrument to local control. Front panel control is enabled and all
motors are stopped (if control was previously remote).
Enter # to designate the maximum flow rate setpoint.
Returns the maximum flow rate setpoint.
Enter # to designate the maximum pressure setpoint.
Returns the maximum pressure setpoint.
Enter # to designate the maximum flow limit in Constant Pressure Mode.
Returns the maximum flow limit setpoint.
Enter # to designate the minimum flow rate setpoint.
Returns the minimum flow rate setpoint.
Returns the minimum pressure setpoint.
Returns the minimum pressure setpoint.
Section 8 Serial Interface
Description
8-23