About This Manual; Specifications - Teledyne SyriXus 65x Installation And Operation Manual

SyriXus Series Pumps Installation and Operation Guide
Section 1 Introduction
1.1 About This
Manual

1.2 Specifications

EAR99 Technology Subject to Restrictions Contained on the Cover Page
The 260x pumps have 1/8" standard Valco
of 1/4" diameter are used for the 1000x, 3/8" diameter for the 500xv,
and 1/8" diameter for the 500x. The 65x uses AE F250C high pressure
fittings. Because of these differences, the packages, tubing, and
options for different models have different part numbers. Additionally,
these pumps are typically used for different applications; therefore,
optional kits and accessories may differ.
The installation procedures for the different SyriXus series pump
models have been combined where applicable, and separated where
necessary, for your convenience.
Optional system configurations may require additional kits and/or
software. These additional options are described in their respective
sections. This manual contains the following sections:
• Section 1 "Introduction"
• Section 2 "Fluid System Connections and Accessories"
• Section 3 "Basic Programming and Operation"
• Section 4 "Gradient Pumping for Pressure, Flow, and Concen-
tration Modes"
• Section 5 "Continuous Flow Introduction, Installation, and
Operation"
• Section 6 "Modifier Addition"
• Section 7 "Modbus Configuration"
• Section 8 "Serial Interface"
• Section 9 "Pump Maintenance, Troubleshooting, and Servicing"
The technical specifications for the SyriXus series syringe pumps are
detailed in Table 1-1 65x Technical Specifications through Table
1-5 "1000x Technical Specifications".
Underwriters Laboratories (UL) has certified all SyriXus series
syringe pumps with the exception of the 100 VAC versions.
®
ports. Pipe thread fittings
NOTE
1-1