SyriXus Series Pumps Installation and Operation Guide
Section 2 Fluid System Connections and Accessories
5. Position the jacket so that it touches the bottom of the cylinder
cap.
Caution
Be careful not to damage the O-rings in the jacket when pushing
them over the threads of the cylinder. Apply a small amount of
soapy water or light oil to the O-rings before installing the jacket to
ease installation.
Cylinder Cap
O-ring
Outlet Connector Port
Pressure Transducer Cable
Temperature Control
Jacket Assembly
Outlet Tubing (Not Supplied)
Cylinder
Inlet Connector Port
Jacket Lock
10-32 Set Screw
Inlet Tubing (Not Supplied)
O-ring
Front Cover
Cylinder Housing
Cylinder Lock
1/4-20 Set Screw
Cover Screw (4X)
Figure 2-10 Temperature control jacket installation
EAR99 Technology Subject to Restrictions Contained on the Cover Page
2-15