Syrixus Series Controller To D Series Pump; D Series Controller To Syrixus Series Pump - Teledyne SyriXus 65x Installation And Operation Manual

SyriXus Series Pumps Installation and Operation Guide
Section 3 Basic Programming and Operation
EAR99 Technology Subject to Restrictions Contained on the Cover Page
3-2
Table 3-1 SyriXus Series Controller to D Series Pump
D Series Pump Model
1000D
500D
500HV
260D
260HP
100DX
65D
65DM
65HP
When a D series controller is connected to a SyriXus series pump, the
model numbers are displayed as shown in Table 3-2 "D Series Con-
troller to SyriXus Series Pump".
Table 3-2 D Series Controller to SyriXus Series Pump
SyriXus Series Pump Model
1000x
500x
500xv
260x
65x
The pump and controller combinations shown in Table 3-2 "D Series
Controller to SyriXus Series Pump" will function as described in the
pump's user manual without any loss of performance. The only minor
difference is the pump model name displayed on the controller for
certain combinations.
If the controller software is not able to function with the attached
pump, the controller will display "UNKNOWN PUMP TYPE" instead
of the pump model. When this happens, use the controller that came
with the pump. The 30D, for example, uses its own controller.
All pumps connected to a single controller must be of the same gen-
eration. A single controller cannot properly operate a mixture of
D-Series and SyriXus pumps.
Model Name Displayed
1000x
500D
500D
260D
260x
100DX
65x
65DM
65HP
Model Name Displayed
1000D
500HP
500HP
260HP
65D
NOTE