Selecting Operating Parameters; Main Menus; Menu One - Teledyne SyriXus 65x Installation And Operation Manual

SyriXus Series Pumps Installation and Operation Guide
Section 3 Basic Programming and Operation
3.2.5 Selecting
Operating
Parameters

3.3 Main Menus

3.4 Menu One

EAR99 Technology Subject to Restrictions Contained on the Cover Page
3-4
Current Pressure
PS/MIN FINAL:
Rate
• Line Four - Line four varies depending on the mode. The options
presented on this line are softkey selectable, i.e. you use the
softkeys (A - D) located below the display to choose the option.
There are four ways to program the system from a menu screen:
• Menu Selection - The number keys are used to select from listed
menu items.
• Softkey Selection - The softkey programming options appear on
the fourth line of the screen. To either toggle or select an option,
press the softkey, A-D, directly below that option.
• Keypad Selection - The programming keys are located on the left
side of the keypad. The pump mode, limits, and refill are all
options that may be selected from the keypad.
• Value Selection - The number keys are used to enter all numeric
values required for pump operation. When a numeric value is
required, a message will blink, prompting to enter an appro-
priate value.
There are four primary menu screens. Access Menu 1 by pressing
. To move forward and back between Menus 1, 2, 3, and 4, or to
MENU
return to the run screen, use softkeys A (
/ ).
VIOUS RETURN
Use the number keys to select a menu option. Selecting a menu option
displays the programming parameters for that option in menu format.
To exit a menu when multiple pumps are connected, press the
S , R , C
TORE ECALL LEAR
Menu 1 provides programming options for units of measure, pump
selection, refill settings, power failure response, system reset, and
display contrast adjustment.
To save all settings and return to the main menu, press
Ending Time
PSI
Final Pressure
M O R E
NOTE
E M
key.
NTRY OR ENU
00:00:00
) and D ( -
P R E
.
(D)
RETURN