Modbus Tcp/Ip; Modbus Configuration Options; Modbus Tcp/Ip Protocol; Modbus Tcp/Ip Configuration Options - Teledyne SyriXus 65x Installation And Operation Manual

SyriXus Series Pumps Installation and Operation Guide
Section 7 Modbus Configuration

7.1.2 Modbus TCP/IP

7.1.3 Modbus
Configuration
Options
Table 7-2 Modbus TCP/IP Configuration Options
Item
IP Address Internet protocol address of device (Default 192.168.1.200)
Subnet Mask Subnet mask (Default 255.255.255.0)
Gateway Gateway (Default 0.0.0.0)
Port TCP port (Default 502)
EAR99 Technology Subject to Restrictions Contained on the Cover Page
7-2
The Modbus TCP/IP protocol implementation uses an Ethernet con-
nection. The Ethernet connections are located on the optional DB25
connector labeled USB/Ethernet. Use optional cable (P/N 60-1244-488)
and coupler (P/N 149-9052-00) to connect to your Ethernet.
Table 7-1 Modbus TCP/IP Protocol
Pin on DB 25 Casing
2
14
15
17
22
23
To access the Modbus configuration settings, press:
(
MORE
(
MORE
(
MORE
Ethernet
Transmit +
Transmit -
Receive +
Receive -
Vgnd
Vgnd
Modbus Options
)
1. Modbus RTU
2. Modbus TCP
)
)
Description
RJ-45
1
2
3
6
4+5
7+8