Unpacking; Controls And Indicators; 1000X Flow Rate Range - Teledyne SyriXus 65x Installation And Operation Manual

SyriXus Series Pumps Installation and Operation Guide
Section 1 Introduction
425
408
400
375
350
340
325
300
275
250
225
200
175
150
125
100
75
50
25
0
0 10
Figure 1-3 1000x flow rate range

1.3 Unpacking

1.4 Controls and
Indicators
EAR99 Technology Subject to Restrictions Contained on the Cover Page
1-8

1000x Flow Rate Range

20 30 40 50 60
Pressure (bar)
Flow Rate (mL/min)
0.001 to 340
340 to 408
After removing the pump, controller, and accessories from the
shipping carton, examine them for signs of shipping damage. Be sure
no internal parts have shaken loose in transit. If there is any shipping
damage, file a claim with the delivering carrier immediately.
Compare the contents of the boxes with the enclosed packing slip. If
there are shortages, contact Teledyne ISCO immediately using the
information in 9.3 "Customer Service Department".
The pump controller regulates all pumping functions. It is designed to
sit on top of the pump base, but may be located elsewhere, according to
safety and convenience. Programming and setup are performed using
the keypad on the front panel. The controller front panel is shown in
Figure 1-4 and described in Table 1-6 "Pump Controller Front Panel
Label". Table 1-7 "Pump Controller Key Functions" explains the key
functions.
The rear panel of the pump controller contains several input and
output connectors, explained in Table 1-8 "Pump Controller Rear
Panel Connectors", and shown in Figure 1-5.
The only operational control on the pump itself is the power switch,
shown in Figure 1-7. The rear panel has several connectors, described
in Table 1-9 "Pump Rear Panel Connectors", and shown in Figure 1-6.
70 80 90 100 110
Max. Pressure (bar)
137.9
(409.8 mL/min – flow rate)
120 130 140 150
137.9

1.9756