New Identity When Changing All The Components; System Test Result (Online Connection) - Skoda Octavia II 2004 Workshop Manual

♦ Operation
♦ Adapt and check the ignition key
7.3 New identity when changing all the com‐
ponents
All necessary steps required for the new installation of all the im‐
mobiliser components are carried out with this programme.
– Connect the ⇒ Vehicle diagnostic tester.
– In the ⇒ Vehicle diagnostic tester, select the operating mode
"Targeted fault-finding".
– Select the "Selected Functions/Components" and subse‐
quently the following menu points using the button "Skip":
♦ Body
♦ Electrical system
♦ 01 – Self-diagnosable systems
♦ Immobiliser
♦ Operation
♦ New identity
7.4

System test result (online connection)

The following steps are carried out with this test programme:
♦ System test for the online connection
♦ Verification of user authorisation
♦ Test the correct cable connection to the Škoda database
The precondition for this is the online connection (network con‐
nection) of the tester.
– Connect the ⇒ Vehicle diagnostic tester.
– In the ⇒ Vehicle diagnostic tester, select the operating mode
"Targeted fault-finding".
– Select the "Selected Functions/Components" and subse‐
quently the following menu points using the button "Skip":
♦ Body
♦ Electrical system
♦ 01 – Self-diagnosable systems
♦ Immobiliser
♦ Operation
♦ Online system test
Octavia II 2004 ➤ , Octavia II 2010 ➤
Electrical system - Edition 12.2013
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
177
7. Immobiliser