Skoda Octavia II 2004 Workshop Manual page 150

Octavia II 2004 ➤ , Octavia II 2010 ➤
Electrical system - Edition 12.2013
1 - Return ring with coil spring
- F350- with integrated steer‐
ing column electronics control
unit - J527-
♦ Removing and installing
⇒ page 142
2 - Steering column combina‐
tion switch
♦ Removing and installing
⇒ page 143
3 - Switch carrier on the steer‐
ing column
❑ Removing and installing
⇒ page 146
4 - Pull-off screws
❑ Breakaway torque ap‐
prox. 15 Nm
5 - Steering lock housing
❑ Removing and installing
⇒ page 146
6 - Ignition starter switch
❑ Removing and installing
⇒ page 147
7.2.2 Removing and installing return ring with
coil spring - F350- with integrated steer‐
ing column electronics control unit -
J527-
Removing
– Remove steering wheel ⇒ Body Work; Rep. gr. 69 . Before
the steering wheel is removed from the steering column, the
wheels must be in the straight ahead position.
– Removing top and bottom steering column trim ⇒ Body Work;
Rep. gr. 70 .
142
Rep. gr.94 - Lights, bulbs, switches - exterior
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�