Skoda Octavia II 2004 Workshop Manual page 129

– Release screws -1- and -3- (0.7 Nm).
– Slacken the upper exterior mirror cover -2- from the catches
-arrows- and remove the cover towards the top
-movement arrows- from out of the mirror housing.
– Remove the socket with the light bulb -2- from the door entry
lighting.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
– Release screws -arrows- (0.8 Nm) and unhook the lower mir‐
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
ror housing cover -1- to the bottom.
– Screw out screws -4- (0.5 Nm) and slacken the side turn signal
-5- out of the lower cover.
– Disconnect plug connection -1-.
Installing
Installation is carried out in the reverse order. When installing,
observe the following:
– Perform a functional test (illumination, mirror adjustment).
Octavia II 2004 ➤ , Octavia II 2010 ➤
Electrical system - Edition 12.2013
3. Side turn signal lights
121