Octavia II 2004 ➤ , Octavia II 2010 ➤
Electrical system - Edition 12.2013
– Insert lamp into the assembly opening and initially tighten the
middle nut -1-.
– Next tighten nut -2- (next to the spray nozzle) and finally nut
-3-.
– Further installation occurs in reverse order.
– After installing, perform a functional test.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
132
Rep. gr.94 - Lights, bulbs, switches - exterior