Skoda Octavia II 2004 Workshop Manual page 20

Octavia II 2004 ➤ , Octavia II 2010 ➤
Electrical system - Edition 12.2013
– Remove the screen cap from the fixing nut of the B+ cable
-1- and unscrew the nut.
– Disconnect plug connection -2-.
– Unscrew the securing nut (3.2 Nm) for line holder -3- and lay
the line to the side.
– Vehicles with AC generator secured from the front side - screw
out screws -arrows- (23 Nm).
– Vehicles with AC generator secured from the side - screw out
screws -arrows- (23 Nm).
Vehicles with TDI engines with Common Rail injection and 1.2/1.4
TSI:
– Remove AC generator downwards.
Other vehicles:
– Remove AC generator upwards.
Installing
Installation is carried out in the reverse order. When installing,
observe the following:
– Vehicles with AC generator secured from the front side – for
easier mounting move the threaded bushes -A- approx 3 mm
-arrows-.
– Observe the tightening torque for fastening the B+ wire see
⇒ page 13 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
– Follow the work procedure when connecting the battery
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
⇒ page 2 .
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
12
Rep. gr.27 - Starter, current supply, CCS