Removing And Installing Switch Mounting On The Steering Column - Skoda Octavia II 2004 Workshop Manual

Note
The following operations are shown on a removed steering col‐
umn switch for purposes of clear presentation.
– Unlock the retaining lugs -arrows- with feeler gauge 1.0 mm
-1- and remove the left level key in the -direction of arrow A-.
– Unlock the retaining lugs -arrows- with feeler gauge 1.0 mm
-1- and remove the right level key in the
-direction of arrow A-.
Installing
Installation is carried out in the reverse order. When installing,
observe the following:
– Make sure that all the retaining lugs lock in place correctly.
7.1.6 Removing and installing switch mount‐
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
ing on the steering column unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Note
The fixing screws of the steering lock must be bored out in order
to remove the switch mounting on the steering column. New pull-
off screws are required for later installation ⇒ Electronic Cata‐
logue of Original Parts .
Octavia II 2004 ➤ , Octavia II 2010 ➤
Electrical system - Edition 12.2013
7. Steering column switch
137