Skoda Octavia II 2004 Workshop Manual page 89

– Release the fixing nuts -arrows- for the bracket of the multi‐
media socket control unit and unhook the control unit -2- with
bracket -3- downwards.
– Disconnect the plug connections.
– If necessary push the multimedia socket control unit out of the
bracket.
Installing
Installation is carried out in the reverse order. When installing,
observe the following:
– If the control unit was replaced, the new control unit must be
coded with ⇒ Vehicle diagnostic tester.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Octavia II 2004 ➤ , Octavia II 2010 ➤
Electrical system - Edition 12.2013
10. Connection for external audio sources MEDIA-IN (multimedia socket)
81