Skoda Octavia II 2004 Workshop Manual page 77

– Release screws (6 Nm) and pull out the amplifier from the
bracket.
– Slacken by tilting out the clamp and disconnect the plug con‐
nection.
Installing
Installation is carried out in the reverse order. When installing,
observe the following:
– When replacing, code the new control unit with the ⇒ Vehicle
diagnostic tester.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Octavia II 2004 ➤ , Octavia II 2010 ➤
Electrical system - Edition 12.2013
69
6. Sound system