Skoda Octavia II 2004 Workshop Manual page 18

Octavia II 2004 ➤ , Octavia II 2010 ➤
Electrical system - Edition 12.2013
– Unscrew nut -1- (23 Nm) and lay aside line holder -2- together
with line.
All vehicles:
– Screw out bottom fixing screw -arrow- and remove the starter.
M12 - 80 Nm
M10 - 40 Nm
Installing
Installation is carried out in the reverse order. When installing,
observe the following:
Note
Use new self-locking nuts -1- and -3- for attaching the earth strap
and the positive cable, see ⇒ Electronic Catalogue of Original
Parts .
Tightening torques for positive cable and earth strap:
Battery earth strap, Pos. -1- 20 Nm
Positive cable, Pos. -3-:
♦ Starter with copper screw 16 Nm
♦ Starter with steel screw 20 Nm
– Follow the work procedure when connecting the battery
⇒ page 2 .
10
Rep. gr.27 - Starter, current supply, CCS
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�