Skoda Octavia II 2004 Workshop Manual page 189

– Unlatch the clamps -arrows- and remove the thermal fuses
-1- from the support.
– Release the stops -1- and -2- in direction of arrow -A- and
-B- and remove the support in direction of arrow -C-.
– Unlatch the fuse -1- -arrow- and remove the holder.
Installing
Installation is carried out in the reverse order. When installing,
observe the following:
– Insert the relay carrier -2- into the guide -1- and then lock it.
– Follow the work procedure when connecting the battery
⇒ page 2 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Octavia II 2004 ➤ , Octavia II 2010 ➤
Electrical system - Edition 12.2013
1. Fuse holder and relay carrier
181