Steering Column Switch- Vehicles As Of Cw 22/10 - Skoda Octavia II 2004 Workshop Manual

Twenty-pin plug -B-
1 - Taxi two-way radio 2
2 - Taxi two-way radio 1
3 - Taxi alarm 2
4 - Taxi alarm 1
5 - 10 - not assigned
11 - Drive CAN bus low
12 - Drive CAN bus high
13 - CCS - "off" - latched position
14 - Convenience system CAN bus high
15 - Convenience system CAN bus low
16 - P-IN (P contact of gear selector lever)
17 - Output terminal 15
18 - Output terminal 50
19 - Terminal 30
20 - Terminal 31
Plug for airbag control unit -C-
1 - Airbag "-"
2 - Airbag "+"
3 - not used
4 - not used
7.2 Steering column switch- vehicles as of
CW 22/10
⇒ "7.2.1 Summary of components of steering column switch ",
page 141
⇒ "7.2.2 Removing and installing return ring with coil spring F350
with integrated steering column electronics control unit J527 ",
page 142
⇒ "7.2.3 Removing and installing steering column combination
switch", page 143
⇒ "7.2.4 Contact assignment on the steering column electronics
control unit J527 ", page 144
7.2.1 Summary of components of steering column switch
Note
The steering column electronics control unit - J527- , steering column combination switch - E595- and base
holder for steering column switch components are designed according to the manufacturer (Valeo or Kostal).
The summary of components illustration shows the Valeo manufacturer's design.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Octavia II 2004 ➤ , Octavia II 2010 ➤
Electrical system - Edition 12.2013
7. Steering column switch
141