Skoda Octavia II 2004 Workshop Manual page 165

– Remove mirror glass ⇒ Body Work; Rep. gr. 66 .
– Release screws -1- and -3- (0.7 Nm).
– Slacken the upper exterior mirror cover -2- from the catches
-arrows- and remove towards the top -movement arrows- from
the mirror housing.
– Remove the socket with the light bulb -2- from the door entry
lighting.
– Release screws -arrows- (0.8 Nm) and unhook the lower mir‐
ror housing cover -1- to the bottom.
– Release screws -2- (0.5 Nm) and remove door entry lighting
-3-.
Installing
Installation is carried out in the reverse order. When installing,
observe the following:
– Perform a functional test (illumination, mirror adjustment).
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Octavia II 2004 ➤ , Octavia II 2010 ➤
Electrical system - Edition 12.2013
10. Door entry lighting
157