Skoda Octavia II 2004 Workshop Manual page 113

– Insert a small cross-head screwdriver through the opening
-arrow- into the hole in the lever -1- slighty press it forward and
switch over from the basic position -B- into the position -A-.
-2- Trim
-3- Cover
The headlight on the right
– Insert a small cross-head screwdriver into the hole in the lever
-1- slighty press it forward and switch over from the basic po‐
sition -B- into the position -A-.
-2- Trim
-3- Cover
Right-hand drive in right-hand traffic
The headlight on the left
– Insert a small cross-head screwdriver into the hole in the lever
-1- slighty press it forward and switch over from the basic po‐
sition -A- into the position -B-.
-2- Trim
-3- Cover
The headlight on the right
– Insert a small cross-head screwdriver through the opening
-arrow- into the hole in the lever -1- slighty press it forward and
switch over from the basic position -A- into the position -B-.
-2- Trim
-3- Cover
1.7.2 Switching over the projector headlights
- inner aperture for right-hand / left-hand
traffic - vehicles as of MY 09 (except Oc‐
tavia Tour)
The headlight inner aperture should be switched over when driv‐
ing in countries which drive on the right or the left thereby pre‐
venting blinding of the drivers travelling in the opposite direction.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Octavia II 2004 ➤ , Octavia II 2010 ➤
Electrical system - Edition 12.2013
1. Headlights – halogen headlights
105