Encoder; Supply Voltage - Pilz PMCprimo MC Operating Manual

Wiring
6.6

Encoder

6.6.1

Supply voltage

See information on
Connector X40a
Supply voltage
1
2
Connector X50a, X50b Pin
Operating Manual PMCprimo MC
1003813-EN-03
WARNING!
Electric shock!
Safe electrical isolation must be ensured for the external power supply that
generates the supply voltage. Failure to do so could result in electric shock.
The power supplies must comply with EN 60950-1, 05/2006, EN 61558-2-6,
11/1997.
CAUTION!
Risk of material damage by applying the supply voltage
Do not connect the supply voltage for the encoder when the encoder input
is used in emulation mode (as an output).
encoder emulation [
Pin
2
X40a
4
Supply voltage for encoder at X41
X40a
2
V+ V+
4
2
X50a
4
X50b
Supply voltage for encoder at X55 and X56
23].
Designation
Encoder Supply
0 V Encoder Supply
*
Designation
Encoder Supply
0 V Encoder Supply
Description
Supply voltage for ex-
ternal encoder
Supply voltage for ex-
ternal encoder (0 V)
X40a/2 is linked internally
to X41/4 and X40a/1 to
X41/2
*If the link is removed, earth
N
fault monitoring must be
used in accordance with
EN 60204 / VDE 0113.
Description
Supply voltage for ex-
ternal encoder
Supply voltage for ex-
ternal encoder (0 V)
| 39