Table of Contents
Advertisement
Safety
3
Safety
3.1
Intended use
The motion controller is suitable for use in logic and motion control applications.
Examples of typical application areas for the product are
Clocked production machinery
}
Continuous manufacturing processes (winding, flying saw, cross cutter)
}
Machine tools
}
Packaging machines
}
Pick and place applications
}
The following is deemed improper use in particular
Any component, technical or electrical modification to the product,
}
Use of the product outside the areas described in this manual,
}
Use of the product outside the technical details (see Technical details).
}
3.2
Safety regulations
3.2.1
Use of qualified personnel
The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by competent persons.
A competent person is a qualified and knowledgeable person who, because of their train-
ing, experience and current professional activity, has the specialist knowledge required. To
be able to inspect, assess and operate devices, systems and machines, the person has to
be informed of the state of the art and the applicable national, European and international
laws, directives and standards.
It is the company's responsibility only to employ personnel who
Are familiar with the basic regulations concerning health and safety / accident prevention,
}
Have read and understood the information provided in the section entitled Safety
}
Have a good knowledge of the generic and specialist standards applicable to the specific
}
application.
Operating Manual PMCprimo MC
1003813-EN-03
NOTICE
EMC-compliant electrical installation
The product is designed for use in an industrial environment. The product
may cause interference if installed in other environments. If installed in other
environments, measures should be taken to comply with the applicable
standards and directives for the respective installation site with regard to in-
terference.
| 12
Advertisement
Table of Contents
