Table of Contents
Advertisement
Operation
Status of LEDs:
The "STAT" and "FUNC" LEDs light up green.
}
8.1.2.5
"STOP" operating status
In "STOP" operating status
No user program is run.
}
The system is operating without error.
}
It is possible to communicate with the motion controller in the terminal program via the
}
command language.
Status of LEDs:
"STAT" LED: Lights up green
}
"FUNC" LED: Off
}
8.1.2.6
"Fatal Error" operating status
"Fatal Error" operating status is reached when an error occurs.
The function is disrupted long-term The operating status is adopted temporarily.
}
The motion controller automatically changes back to "Startup" operating status.
}
The error is entered in the error stack.
}
Status of LEDs:
The "STAT" and "FUNC" LEDs light up red.
}
8.1.3
Change in operating status
0
-->
The system changes to "Power Off" operating status when the 24 VDC supply voltage has
been switched off.
0
The system changes to "Startup" operating status when the 24 VDC supply voltage has
been switched on.
1
The "STAT" LED flashes green for 4 s, if the "Startup" operating status has been run
without error.
Press the reset button during this time to change to "Boot Menu" operating status.
}
1
"Startup" operating status has been run without error. The system changes to "RUN" status
if a user program was loaded in "Startup" status.
1
Operating Manual PMCprimo MC
1003813-EN-03
All operating states change to "Power Off"
1
-->
Change from "Power Off" to "Startup"
2
-->
Change from "Startup" to "Boot Menu"
3
-->
Change from "Startup" to "RUN"
4
-->
Change from "Startup" to "STOP"
| 57
Advertisement
Table of Contents
