Safety
3.2.2
Warranty and liability
All claims to warranty and liability will be rendered invalid if
The product was used contrary to the purpose for which it is intended,
}
Damage can be attributed to not having followed the guidelines in the manual,
}
Operating personnel are not suitably qualified,
}
Any type of modification has been made (e.g. exchanging components on the PCB
}
boards, soldering work etc.).
3.2.3
Disposal
When decommissioning, please comply with local regulations regarding the disposal of
}
electronic devices (e.g. Electrical and Electronic Equipment Act).
3.3
Standards
To use the device correctly you will need to have a good knowledge of the relevant stand-
ards and directives. The following standards are relevant:
EN 61131-1: Programmable controllers – Part 1: General information
}
EN 61131-2: Programmable controllers – Part 2: Equipment requirements and tests
}
EN 61131-3: Programmable controllers – Part 3: Programming languages
}
Please note this is not an exhaustive list of safety standards and directives.
Where standards are undated, the 2015-05 latest editions shall apply.
Operating Manual PMCprimo MC
1003813-EN-03
| 13