Zom-Lens Zoom Position Adjustment - Christie Boxer 30 Technical Reference

ZOM–Lens Zoom Position Adjustment
Sets the lens zoom.
This command requires a zoom motor on the lens for it to work and is only available when the
projector is on.
Commands
Command Description
ZOM?m Returns the current minimum and maximum
values for the zoom position based on the
last lens calibration performed. The returned
range is persistent across AC cycles. (Read-
only)
ZOM <position> Adjusts the lens zoom to the specified
position. The position is persistent across AC
cycles. (Save value)
Examples
Get the current minimum and maximum values for the zoom axis:
(ZOM?m)
Result:
(ZOM!M-2400 900)
Move the lens to position 500 for the zoom motor:
(ZOM 500)
Boxer 30 Technical Reference–Serial API Commands
020-102096-08 Rev. 1 (08-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
—
position = Numeric value subject to the
range returned in ZOM?m
62